Trusted Wafer Type Check Valve Manufacturer
NTVAL provides durable wafer type check valves designed for reliable performance, certified to meet international standards. Backed by an 18-month warranty, we offer comprehensive after-sales service, quick quotations, and efficient delivery to keep your projects on track.
Reliable Wafer Type Check Valve
Wafer type check valves are designed to prevent fluid from reversing in a piping system. They are called “wafer” valves because of their thin, compact size compared to other check valves. These valves operate automatically, so they don’t require a valve actuator or operator.
Manufacturers design wafer type check valves with a high level of reliability, making them suitable for critical applications like freshwater supply, where preventing contamination is essential. Wafer type check valves are versatile and can be used in various applications, ranging from low to high temperatures and pressures.
The materials used in the valve’s internal components determine the temperature range in which the valve can operate. For example, valves made with soft materials like rubber or plastic are recommended for low-temperature applications below 60°C. In contrast, wafer type check valves made with metallic materials can handle high temperatures, making them suitable for use above 60°C.
Controle de qualidade
The PMI Test verifies that the Wafer Type Check Valve’s material composition matches required specifications, supporting consistent and safe performance.
Teste PMI
The Sealing Test validates that the valve holds pressure and prevents leaks, demonstrating its capability for reliable fluid control.
Teste de vedação
The Low Emission Test measures and limits any emissions from the valve, confirming that it meets industry environmental standards.
Teste de baixa emissão
During the Impact Test, the valve’s resilience is evaluated, showing its ability to withstand external impacts without damage.
Teste de impacto
Each valve undergoes Dimension Inspection to confirm precise measurements, aligning accurately within system requirements.
Inspeção de dimensões
This test measures paint thickness to verify that the valve has adequate coating, providing resistance to corrosion and wear.
Teste de espessura da pintura
The Penetrant Test detects surface irregularities, making sure the valve’s structural integrity remains uncompromised.
PT
Material Inspection confirms that the valve components are made from appropriate materials, suitable for their intended applications.
Inspeção de materiais
Nossas aplicações de válvulas nos principais setores
Descubra como nossas soluções avançadas de válvulas melhoram o controle de fluxo, proporcionando maior eficiência, segurança e garantia de qualidade rigorosa.
The Wafer Type Check Valve is used to control flow in chemical processes, preventing contamination and maintaining operational consistency.
Processamento químico
This valve integrates smoothly into petrochemical systems, managing fluid flow and blocking backflow to protect operations.
Química da gasolina
The Wafer Type Check Valve is designed for critical applications, managing fluids in high-pressure environments to promote safe processes.
O.P.G. e Nuclear
In the pulp industry, this valve maintains proper flow rates and prevents clogging, contributing to efficient processing and productivity.
Polpa
Wafer Type Check Valves in mining applications handle rough materials effectively, controlling flow rates and reducing wear.
Mineração
These valves control water movement efficiently, preventing backflow and helping to maintain the purity of water and sewage systems.
Água e esgoto
The valve operates in steam systems to regulate flow, keeping temperature levels stable and supporting system efficiency.
Sistema de vapor
In boiling systems, the Wafer Type Check Valve controls pressure and prevents reverse flow, promoting continuous and safe operation.
Sistema de ebulição
Obtenha uma válvula mais versátil
Wafer Silent Check Valves - Cast Iron, Carbon Steel & Stainless Steel
Wafer silent check valves are specifically designed for liquid applications. If you need a valve for natural gas, steam, or vacuum service, please refer to our double disc wafer check valve.
These valves are compact in design and feature a low cracking pressure. The spring automatically closes the disc when the flow reaches zero, preventing flow reversal and water hammer. The disc is fully guided at the top and bottom to prevent any binding or misalignment. The valve disc opens with less than 1/2 pound per square inch of pressure. In all sizes, the discs lift 1/3 of an inch from their seats for every 1 inch of pipe size.
Wafer check valves use a swinging disc to control fluid flow, either allowing or blocking it. Their compact design makes them ideal for installation in tight spaces where flanged check valves can’t fit. The key difference between wafer check valves and flanged check valves is in their construction. Wafer check valves have molded bodies around the area where the disc opens, while flanged check valves do not.
This design difference significantly impacts the valve’s functionality. In flanged check valves, the flanged installation leaves limited space for the disc to open fully within the pipeline, often restricting flow. In contrast, wafer check valves, with their molded bodies, provide enough room for the disc to swing open completely, allowing full flow through the valve. This is crucial in applications where full flow is required.
Because of this, wafer check valves are typically recommended for applications where space is limited but full flow is not a concern. On the other hand, swing check valves are preferred when a full port valve is necessary.
Construction and Components of a Wafer Type Check Valve
Wafer type check valve manufacturers offer these valves with either flanged connections or butt-weld ends for direct welding to the pipeline. The valve features two half-discs, or plates, that are pivoted on a central post called the hinge pin. These plates are held in place against the body seats by springs mounted on the hinge pin. The springs are kept from rotating freely by a pin running parallel to the hinge pin.
In some designs, the pins do not penetrate the valve body. When fluid flows through the valve, its force is transferred to the springs, causing them to wind up and allowing the plates to open. The degree to which the plates open depends on the fluid force and the spring strength. Stronger springs result in faster plate closure, but they also require higher fluid pressure to open the plates, affecting the valve’s operation.
Primavera
The spring helps close the valve immediately after fluid pressure decreases. It works by getting compressed when fluid pressure is applied. Once the pressure drops, the spring tries to return to its normal length, forcing the valve disc to close and seal the valve.
Corpo da válvula
This is the part of a wafer type check valve that houses the internal components. The body also serves as a pressure barrier, so it must be made of strong materials to ensure the valve remains leak-free under pressure.
Disc/plate
This is the part of a wafer type check valve responsible for opening and closing the valve to either allow or block fluid flow.
Assento
The seat is part of a wafer type check valve where the valve disc rests, ensuring a tight seal to prevent fluid leakage.
How Does a Wafer-Type Check Valve Work?
A wafer type check valve operates based on the principle of pressure difference. The valve opens when the suction pressure is higher than the outlet pressure. In this scenario, the high-pressure fluid entering the valve has enough energy to force the valve plate to move upward, allowing fluid to flow through the valve.
The fluid continues to flow until the inlet pressure decreases. If the inlet pressure drops or if the fluid tries to flow backward, the valve springs quickly push the disc to close the valve. This action prevents any backward flow, which is crucial in applications like freshwater supply, chemical processing, or food processing, where contamination must be avoided.
Figure: Working of a wafer type check valve.
Types of Wafer Type Check Valves
Forged Wafer Type Check Valve
This wafer type check valve is manufactured using the forging method, which produces very strong valves suitable for high-pressure and high-temperature applications. The process begins by heating the metallic material to a high temperature, making it soft enough to shape. Once heated, the material undergoes mechanical shaping, where it is forced into the desired form.
Valves made through forging are typically more expensive because the process requires significant labor to produce a high-quality product. Additionally, not all materials can be used in the forging method, so forged wafer-type check valves are only possible with certain materials, unlike casting methods, which offer more flexibility in material selection.
Casted Wafer Type Check Valve
This wafer-type check valve is produced using the casting process. In casting, the metallic material used to make the valve is heated to a very high temperature until it melts. The molten material is then poured into a mold and allowed to cool and solidify. Once solidified, the valve is removed from the mold.
Manufacturers often prefer casting for wafer-type check valves because it requires less labor compared to the forging method. The casting process is simpler and more efficient, allowing for the production of a greater variety of valve types, as many different materials can be used in casting, unlike the more limited forging process.
Plastic Wafer Type Check Valve
This wafer-type check valve is made from plastic materials such as polyvinyl chloride (PVC) and polypropylene (PP). These valves are ideal for low-temperature applications, with manufacturers recommending them for use at temperatures below 60°C. Plastic materials offer better corrosion resistance than metallic ones, making them suitable for acidic environments.
Plastic wafer-type check valves are lighter in weight compared to their metallic counterparts due to the lower density of plastic materials like PVC and PP. Additionally, plastic valves are generally more affordable than metallic ones. Despite their lighter weight and lower cost, these valves still provide high impact resistance and a long service life.
Flanged Wafer Type Check Valve
This wafer-type check valve features flange ends with holes for connecting to a pipe using bolts and nuts. The pipe is also equipped with flanged ends to ensure proper mating surfaces. Manufacturers recommend this type of wafer check valve for high-pressure applications due to its high strength, which is enhanced by the use of bolts, nuts, and a gasket placed between the valve and the pipe.
This setup ensures a secure, leak-free connection. However, compared to other valve types, flanged check valves are heavier, making them most economical and effective in high-pressure environments.
Welded End Wafer Type Check Valve
This wafer-type check valve is connected to the pipe using the welding method. Manufacturers recommend these valves for handling hazardous fluids such as acids and petroleum products.
The welded connection ensures zero fluid leakage, as the valve is completely sealed to the pipe, preventing even a single drop from escaping. However, these valves cannot be inspected while in use, as they cannot be opened without removing the weld. Therefore, they are best suited for applications where valve repair or cleaning is not anticipated.
Applications of Wafer Type Check Valves
Aplicativos de mineração
Used in mining applications.
Chemical Manufacturing Plants
These valves are used in chemical manufacturing plants.
Sistemas de abastecimento de água
Employed in water supply systems to prevent water contamination.
Pharmaceutical Applications
Utilized in pharmaceutical applications.
Steam Power Generation
Used in steam power generation plants to control the flow of water and steam.
Food and Beverage Manufacturing
Applied in food and beverage manufacturing plants.
Setor de petróleo e gás
Essential in oil and gas transportation and refinery applications.
Advantages of wafer type check valves
Evita o fluxo reverso de fluido
Does not allow fluid flow in the reverse direction.
Low-Pressure Loss for Enhanced Efficiency
Low-pressure loss enhances piping efficiency, saving pumping energy.
Automatic Operation for Cost Savings
Operates automatically, reducing the need for a valve operator or actuator, unlike other valve types like globe and gate valves.
Desempenho sem vazamentos
Free from fluid leakage if used and inspected according to the wafer type check valve manufacturer’s instructions.
Pressure Maintenance
Can maintain the expected pressure levels.
Long Service Life
Durable, with the potential for long-term use when operated according to the manufacturer’s instructions.
Versatility Across Applications
Versatile, used in various applications from domestic to commercial and industrial settings.
Suitable for Various Temperature and Pressure Conditions
Can be used in both low and high temperature and pressure applications.
Compact and Lightweight Design
Small in size and light in weight compared to other check valves.
Disadvantages of Wafer Type Check Valves
Unidirectional Fluid Control
Does not allow fluid flow in both directions.
Limitations in Pulsating Flow Applications
These valves are not suitable for use in pulsation fluid flow applications.
Troubleshooting Wafer Type Check Valves
No Fluid Flow Through the Wafer Type Check Valve
- The pipe feeding the valve is blocked. Check the pipe for any blockage and remove any foreign material obstructing fluid flow.
- There is low suction pressure relative to the valve spring strength. Increase the suction pressure or use a wafer type check valve with a lower spring strength to make it easier for the valve plate to open.
Fluid Leakage Through Bolt Connections
- The connecting bolts are loose. Tighten the bolts and nuts to the torque recommended by the wafer type check valve manufacturer.
- The gasket is worn out or damaged. Replace the gasket.
Wafer Type Check Valve Not Closing
- The disc is trapped in the wide-open position. Follow the manufacturer’s instructions to open the valve and remove any material trapping the disc.
- Valve springs are damaged. Replace the valve.
Dimensões
SIZE RANGE: 2 – 10 inch (50 mm – 250 mm)
MAX TEMP: 200°F (93°C)
MAX PRESSURE:
ASME 150#: 300 PSI at 150°F / ASME 300#: 500 PSI at 150°F
ASME 150#: Max Pressure 300 PSI at 150°F
ASME 300#: Max Pressure 500 PSI at 150°F
| Item # | Qty | Descrição | Material | ASTM |
| 1 | 1 | Body(Epoxy Coated) | Ferro dúctil | A53665-45-12 |
| 2 | 1 | Bucha | Bronze | C95400 |
| 3 | 1 | Primavera | Aço inoxidável | 302 |
| 4 | 1 | Poppet | Bronze | C87600 |
| 5 | 1 | Anel do assento | Bronze | C87600 |
| 6 | 1 | O-Ring | EPDM | 5778-70 |
| 7 | 1 | O-Ring | EPDM | 5778-70 |
| Tamanho | Parte # | ØA | B | ØC | Peso | #of Bolts | Bolt Size by Flange | ||||||||
| polegada | mm | polegada | mm | polegada | mm | polegada | mm | lbs | kg | 150# | 300# | 150# | 300# | ||
| 2 | 50 | 2434R | 2-13/32 | 61 | 2-5/8 | 67 | 4-1/4 | 108 | 5 | 2.5 | 4 | 8 | 5/8×5-1/4 | 5/8×5-1/2 | |
| 3 | 80 | 2435R | 3-1/4 | 83 | 3-1/8 | 79 | 5-3/4 | 146 | 11 | 5 | 4 | 8 | 5/8×6-1/4 | 3/4×7 | |
| 4 | 100 | 2436R | 4-3/8 | 111 | 4 | 102 | 7 | 178 | 18 | 8 | 8 | 8 | 5/8×7 | 3/4×8 | |
| 6 | 150 | 2437R | 5-29/32 | 150 | 5-1/2 | 140 | 9-3/4 | 248 | 36 | 16.5 | 8 | 12 | 3/4×8-3/4 | 3/4×10 | |
| Flomatic Corporation can accept no responsbility to possible errors in catalogues, brochures and other printed material. Flomatic Corporation reserves the right to alter its products without notices. This also applies to product already agreed. All trademarks in this material are property of the respective companies. All righs reserved. Flomatic Corporation. The drawing & information on this drawing sheet are the sole & exclusive property of Flomatic Corporation. Any reproduction, distribution, display or use of these drawings or information in whole or in part without written authorized of Flomatic Corporation is strictly prohibited. | |||||||||||||||
Max Temp 200°F(93℃)
Max Inlet Pressure @150°F (65℃)150#300 psi (21bar)
Max InletPressure @150°F (65℃)300#500 psi(34bar)
| Item # | Qty | Descrição | Material | ASTM |
| 1 | 1 | Body(Epoxy Coated) | Ferro dúctil | A53665-45-12 |
| 2 | 1 | Bucha | Bronze | C95400 |
| 3 | 1 | Primavera | Aço inoxidável | 302 |
| 4 | 1 | Poppet | Bronze | C87600 |
| 5 | 1 | Anel do assento | Bronze | C87600 |
| 6 | 1 | O-Ring | EPDM | 5778-70 |
| 7 | 1 | O-Ring | EPDM | 5778-70 |
| Tamanho | Parte # | ØA | B | ØC | Peso | #of Bolts | Bolt Size by Flange | ||||||||
| polegada | mm | polegada | mm | polegada | mm | polegada | mm | lbs | kg | 150# | 300# | 150# | 300# | ||
| 2-1/2 | 65 | 2432R | 2-9/16 | 65 | 2-7/8 | 73 | 5 | 127 | 7 | 3 | 4 | 8 | 5/8×5-1/4 | 3/4×6-1/2 | |
| 5 | 125 | 2433R | 5-1/4 | 133 | 4-3/4 | 121 | 8-3/8 | 213 | 25 | 11.5 | 8 | 8 | 3/4×7-3/4 | 3/4×9 | |
| Flomatic Corporation can accept no responsbility to possible errors in catalogues, brochures and other printed material. Flomatic Corporation reserves the right to alter its products without notices. This also applies to product already agreed. All trademarks in this material are property of the respective companies. All righs reserved. Flomatic Corporation. The drawing & information on this drawing sheet are the sole & exclusive property of Flomatic Corporation. Any reproduction, distribution, display or use of these drawings or information in whole or in part without written authorized of Flomatic Corporation is strictly prohibited. | |||||||||||||||
Deseja fazer parceria com um especialista Borboleta Portão Globo Verificar Bola Controle Segurança Fornecedor de válvulas?
Outras percepções gerais aqui
Specs of Wafer Type Check Valves
Classificação de pressão
Wafer Type Check Valves are engineered to handle high-pressure environments, with pressure ratings of up to 2500 PSI (pounds per square inch). This makes them suitable for demanding applications where maintaining system integrity is essential. Properly matching the valve’s pressure rating to the system’s maximum operating pressure prevents valve failure and potential pipeline damage.
Tamanho e dimensões
Wafer Type Check Valves are available in a wide range of sizes, from 2 inches to 24 inches in diameter. The appropriate size guarantees a secure fit within the pipeline and smooth operation. I know you will agree that incorrect sizing can cause installation challenges and hinder system performance, leading to inefficiencies. These valves are designed to fit precisely, contributing to overall system stability and flow management.
Compatibilidade de materiais
Wafer Type Check Valves are typically constructed from durable materials such as stainless steel and cast iron. For instance, these materials are chosen for their strength, corrosion resistance, and ability to withstand harsh operating conditions. NTVAL recognizes that establishing material compatibility with the fluid and environmental conditions extends the valve’s service life.
Faixa de temperatura
These valves are designed to operate efficiently in extreme temperature conditions, with a temperature range of -20°F to 400°F. This wide range allows them to perform in both cold and high-heat environments without compromising functionality. Selecting a valve that matches the system’s temperature requirements is key to preventing material degradation and establishing consistent operation across varying conditions.
Features of Wafer Type Check Valves
Slim Profile
Wafer Type Check Valves have a slim profile, making them ideal for installations where space is limited. This slim design allows the valve to fit snugly between two flanges without adding significant bulk to the piping system. Despite their slim profile, these valves are built from sturdy materials like stainless steel and cast iron, ensuring long-term durability.
Design de disco
The disc in a Wafer Type Check Valve is designed to swing open and close with fluid flow. This disc mechanism allows for smooth operation, enabling fluid to pass through when the flow is in the right direction. When the flow reverses, the disc quickly shuts to block backflow, thus protecting the system. Similarly, the design of the disc establishing minimal pressure drop, maintaining efficiency in the fluid flow.
Universal Fit
Wafer Type Check Valves are engineered to fit universally between various flange standards. This universal fit feature simplifies the selection process, making it easier to integrate the valve into existing piping systems. The valves are available in different sizes, accommodating a wide range of pipeline diameters. This versatility allows them to be used in numerous applications, from low to high pressure and temperature conditions.
Benefits of Wafer Type Check Valves
Eficiência de espaço
The slim profile of Wafer Type Check Valves allows for efficient use of space within piping systems. Their design requires less room for installation, making them perfect for areas with limited space. This space efficiency is crucial in complex piping networks where optimizing space can lead to better system organization. It also reduces the need for extensive support structures, simplifying the overall installation process.
Easy Installation
Wafer Type Check Valves are straightforward to install due to their compact design and universal fit. For instance, the lightweight nature of these valves makes handling and positioning easier during installation. Their compatibility with various flange standards means they can be easily integrated without the need for special adaptors. This ease of installation translates to reduced labor costs and quicker setup times.
Enhanced System Protection
By preventing backflow, Wafer Type Check Valves provide enhanced protection for the entire piping system. The quick-closing disc mechanism helps prevent damage to pumps and other critical components caused by reverse flow. At NTVAL, this protection guarantees that the system operates smoothly and efficiently, reducing the risk of costly repairs and downtime.
Applications of Wafer Type Check Valves
O.P.G. e Nuclear
In the O.P.G (Oil, Power, Gas) and nuclear industries, Wafer Type Check Valves are vital for maintaining safety and efficiency. These valves prevent backflow in pipelines carrying oil, gas, or coolant, which is essential for the safe operation of reactors and power plants. By enhancing unidirectional flow, they help protect critical systems from potential damage and enhance overall operational stability.
Água e esgoto
Wafer Type Check Valves are essential in water and sewage systems to control the direction of flow and prevent contamination. They stop sewage from flowing back into clean water lines, which is crucial for maintaining public health and safety. Additionally, their automatic operation helps keep the system running smoothly with minimal manual intervention, making it highly efficient for municipal water management.
Sistemas HVAC
In HVAC systems, Wafer Type Check Valves are instrumental in regulating airflow and preventing reverse flow. They help maintain optimal air pressure across ducts and pipelines, supporting system efficiency and balanced ventilation. Their ability to manage directional flow in varied temperature and pressure conditions makes them an excellent fit for commercial and industrial HVAC applications.
Pulp and Mining
Wafer Type Check Valves are widely used in the pulp and mining industries to control the flow of slurries, water, and other fluids. These valves prevent backflow, which is crucial for maintaining the efficiency of the processing systems and protecting equipment from damage. NTVAL understands that their durable design can handle the abrasive and corrosive materials typically found in these industries.
3 Considerations When Buying a Wafer Type Check Valve
01
Projeto de segurança contra incêndio
When choosing a Wafer Type Check Valve, fire safety is a critical consideration. These valves are inherently designed with fire-safe materials and construction. In case of a fire, both resilient and metal seat valves provide secure metal-to-metal sealing, making sure the system remains operational under extreme conditions. Opt for valves with fire-safe features to protect your operations where high-level fire protection is a must.
02
Lightweight and Compact Design
When selecting a Wafer Type Check Valve, weight, and size play a significant role in installation and overall system efficiency. Wafer valves offer an 80% to 90% weight reduction compared to full-body swing check valves. On top of that, their compact design minimizes the distance between flanges, allowing for easier installation and optimized space utilization.
03
Low Cracking Pressure and Pressure Loss
Another key factor when choosing a Wafer Type Check Valve is its low cracking pressure, which helps to minimize overall pressure loss in your system. Valves with low cracking pressure reduce the risk of water hammer, protecting your system from damage. NTVAL suggests to prioritize valves with efficient flow designs to establish smooth operation and minimal disruption, especially in applications requiring reliable fluid control.
PERGUNTAS FREQUENTES
At NTVAL, our general guarantee period is 18 months from the delivery date.
We implement a comprehensive quality control system that includes various stages of production, testing, and inspection to ensure the reliability, durability, and performance of our valves. For detailed quality control information, please visit our website.
Yes, each valve we offer comes with a 3.1 certificate, provided free of charge. We will send the certificate for your approval before delivery.
The lead time depends on the valve size and quantity. Typically, the production time takes around 5-8 weeks.
Mergulhe mais fundo em nossos recursos
Procurando opções de produtos mais diversificadas? Navegue por nossas seleções escolhidas a dedo:
Para algumas leituras perspicazes, elaboramos uma lista de artigos recomendados só para você:
Ainda não encontrou o que está procurando? Não hesite em Entre em contato conosco. Estamos disponíveis 24 horas por dia para ajudá-lo.
